Services
Panashield provides a fully range of services, including upgrading
existing facilities, dismantling and relocation of existing shielded
rooms, RF shield testing, measurement of chamber NSA/NSTL and Field
Uniformity and measurement of the Quiet Zone in Free Space Chambers.
Our services are summarised below. Panashield will be pleased
to discuss your specific needs and provide a cost effective solution.
Shielded Room and Anechoic Chamber Upgrades and Relocation
It sometimes becomes necessary to relocate a shielded rooms or
anechoic chambers, either within within an existing building or maybe to
a new location. Panashield has a team of installers with the experienced
to dismantle and re-install an existing facility with the minimum
disruption and inconvenience.
It is also possible to change the size or configuration of a shielded
room or anechoic chamber, or even upgrade an existing facility with new
or additional RF absorbing materials. Panashield is able to offer a
complete range of cost effective solutions, including all necessary
services, shielding and absorber products.
Shielded Room RF Testing
Panashield offers a full testing service for RF shielded rooms.
Typically this is performed upon completion of a shielded room
installation or when a client needs to know the shielding level of an
existing shielded facility.
We provide qualified test engineers and all necessary calibrated test
equipment. Typically testing is carried out within the 200 MHz to 1 GHz
frequency range but this can often be extended down to 10 KHz and up to
10 GHz, 18 GHz or even 40 GHz, if necessary.
EMC Anechoic Chamber Testing
It is often necessary to verify the performance of anechoic chambers
used to perform testing to international EMC specifications.
Typically for radiated emissions testing the NSA/NSTL of a chamber is
measured from 30 MHz to 1 GHz with options up 10 GHz or 18 GHz.
For radiated immunity/susceptibility testing the field uniformity of a
chamber is measured from either 26 MHz or 80 MHz and up to 1 GHz with
options up 10 GHz or 18 GHz.
Panashield offers a comprehensive measurement, calibration and
certification service for all classes of anechoic chambers.
Free Space Antenna and RCS Chamber Testing
Panashield is also able to provide the necessary test engineers and
equipment to measure the Quiet Zone in Chambers designed for Antenna
Pattern and RCS measurements.
This testing can start as low as low as 500 MHz and typically up to
10GHz and 18 GHz. Equipment is also available to measure up to 40 GHz or
even 100 GHz when required.
