Panashield's 3 metre EMC anechoic chamber provides a test facility for performing full compliance radiated emissions and radiated immunity testing to various international standards. This proven design has excellent measured results well within the required +/-4 dB NSA levels specified in ANSI C63.4
and EN50147 part 2 (emissions) and is also fully compliant for EN61000-4-3 (immunity). The chambers are self-supporting and constructed using the versatile Panabolt modular panel RF shielding system
and provide a high level of shielding integrity.
Nominal Size:
8.7 m long x 6 m wide x 5.1 m high (5.4 m with raised ground plane reflective floor)
Frequency range:
Emissions 30 MHz to 18 GHz / 40 GHz
Immunity 26 MHz to 18 GHz / 40 GHz
Standard Features:
Self supporting structure
Single leaf RF shielded door 1200 wide x 2100 mm high or double leaf door
1800 wide x 2100 mm high
Two connector panels with two type N connectors
Four waveguide vents 300 x 300 mm
30 amp filters for power
5 amp filters for individual lighting
Earth/ground stud
Full installation
Absorber Lining:
Walls and ceiling covered with ferrite absorber panels
Patch of ferrite panels for positioning on floor between EUT and antenna
for immunity testing.
Hybrid absorber on critical area of EUT and antenna end walls
Hybrid absorber on critical area of side walls and ceiling
Hybrid absorber for placing over an area of the ferrite floor patch
Typical Options:
RF shielded control room and also option for amplifier room
Panashield's 3 metre EMC anechoic chamber provides a test facility for performing full compliance radiated emissions and radiated immunity testing to various international standards. This proven design has excellent measured results well within the required +/-4 dB NSA levels specified in ANSI C63.4
and EN50147 part 2 (emissions) and is also fully compliant for EN61000-4-3 (immunity). The chambers are self-supporting and constructed using the versatile Panabolt modular panel RF shielding system
and provide a high level of shielding integrity. 