Panashield's 10 metre EMC anechoic chamber provides a
full compliance test facility for performing radiated emissions measurements
to EN50147 part 2 and ANSI C63.4 at test distances up to 10 metres Normalised Site Attenuation (NSA) of better than +/-4dB is attained within a 3 metre diameter quiet zone at a 10 metre test distance. NSA measurements can also be made at 5 metre and 3 metre test distances. The chamber design is also suitable to perform full compliance radiated immunity testing per EN / IEC61000-4-3 and other International standards. This
10 metre EMC test chamber is constructed using the versatile Panabolt modular panel RF shielding system providing a high level of shielding integrity.
Nominal Size:
18.6 m long x 12.6 m wide x 8.1 m high (8.4 to 8.6 m with raised ground plane
reflective floor)
Frequency Range:
Emissions: 30 MHz to 18 GHz / 40 GHz
Immunity: 26 MHz to 18 GHz / 40 GHz
Standard Features:
Self supporting structure
Single leaf RF shielded door 1200 wide x 2100 mm high or double leaf door
1800 wide x 2100 mm high
Two connector panels with two type N connectors
Six waveguide vents 300 x 300 mm
30 amp filters for power
5 amp filters for individual lighting
Earth/ground stud
Full installation
Absorber Lining:
Walls and ceiling covered with ferrite absorber panels
Patch of ferrite panels for positioning on floor between EUT and antenna for
immunity testing.
Hybrid absorber on critical area of EUT and antenna end walls
Hybrid absorber on critical area of side walls and ceiling
Hybrid absorber for placing over an area of the ferrite floor patch
Typical Options:
RF shielded control room and also option for amplifier room
Panashield's 10 metre EMC anechoic chamber provides a
full compliance test facility for performing radiated emissions measurements
to EN50147 part 2 and ANSI C63.4 at test distances up to 10 metres Normalised Site Attenuation (NSA) of better than +/-4dB is attained within a 3 metre diameter quiet zone at a 10 metre test distance. NSA measurements can also be made at 5 metre and 3 metre test distances. The chamber design is also suitable to perform full compliance radiated immunity testing per EN / IEC61000-4-3 and other International standards. This
10 metre EMC test chamber is constructed using the versatile Panabolt modular panel RF shielding system providing a high level of shielding integrity. 