Ferrite absorber is produced as tiles of size 100 mm x 100 mm and thickness available between 6 mm to 6.7 mm. For ease of installation the ferrite tiles are factory glued to wood or steel panels of size 300 mm x 300 mm or 300 mm x 600 mm. When installed in Panashield's modular shielded room these panels are screwed directly to the shielding panels.
Ferrite absorbers provide high performance at low frequency compared with pyramidal RF absorber, providing excellent absorption from 30 MHz to 1 GHz. They are very thin allowing chambers to be designed smaller than those previously designed using conventional pyramidal absorber. This can be important where available space within buildings is limited.