5 Metre EMC Test Chamber
Panashield's 5 metre EMC anechoic chamber provides full compliance test facility for performing radiated emissions measurements at test distances up to 5 metre. Normalised Site Attenuation (NSA) of better than +/-4dB is attained within a 2 metre diameter quiet zone at a 5 metre test distance and 3 metre diameter quiet zone at a 3 metre test distance (measured in accordance with EN 50147-2 / ANSI C63.4 / CISPR16-1-4). The chamber design is also suitable to perform full compliance radiated immunity testing to EN /IEC61000-4-3. This 5 metre EMC test chamber is constructed using the versatile Panabolt modular panel RF shielding system providing a high level of shielding integrity.
Nominal Size:
- 10.8 m long x 6.6 m wide x 5.4 m high (5.7 m with raised ground plane reflective floor)
Frequency range:
- Emissions 30 MHz to 18 GHz / 40 GHz
- Immunity 26 MHz to 18 GHz / 40 GHz
Standard Features:
- Self supporting structure
- Single leaf RF shielded door 1200 wide x 2100 mm high or double leaf door
- 1800 wide x 2100 mm high
- Two connector panels with two type N connectors
- Six waveguide vents 300 x 300 mm
- Raised ground plane floor
- Integrated turntable - 2 m, 3 m or larger diameter
- Variable height antenna tower/mast
- Dual controller with fibre optic interface
- 30 amp filters for power
- 5 amp filters for individual lighting
- Earth/ground stud
- Full installation
Absorber Lining:
- Walls and ceiling covered with ferrite absorber panels
- Patch of ferrite panels for positioning on floor between EUT and antenna for immunity testing.
- Hybrid absorber on critical area of EUT and antenna end walls
- Hybrid absorber on critical area of side walls and ceiling
- Hybrid absorber for placing over an area of the ferrite floor patch
Typical Options:
- RF shielded control room and also option for amplifier room
- Larger RF shielded door
- CCTV monitoring system
- Additional filters
- RF shielding effectiveness measurement
- Field Uniformity measurement
- Normalised site attenuation (NSA) measurement
Standards:
- EN50157 part 2
- ANSI C 63.4-2000
- EN55011 / CISPR 11
- EN55016 / CISPR 16-1-4
- EN55022 / CISPR 22
- EN / IEC 61000-4-3
- SAE Various specifications
